Millwork / Furniture - Retarder Concentrate

  • Product Description
  • Physical Properties
  • Application Data
  • Directions for Use
  • Print MSDS/TDS

Product Code:

4T175

Product Description and Uses:

Schwartz Retarder Concentrate is 100% active reducer/retarder for lacquer finishes based on nitrocellulose and acrylic.

Its especially low volatility makes it an excellent choice to eliminate defects associated with extremely fast dry including orange peel, leveling issue, and dry spray.

Product Advantages:

  1. High quality.
  2. Excellent clarity
  3. Low volatility makes an excellent retarder.

Standard Container Sizes

205L Drum

18.9 Litre Pail

Physical Properties:

Flash Point:

27.2°C

Density:

0.885 g/ml

Appearance:

Clear, colourless

Shelf Life:

3 years unopened

Environmental Information:

VOC: 885 g/L

Suggested Uses:

Use for reducing and retarding the dry time of nitrocellulose and acrylic-based lacquers.

Mixing Ratio:

NA

Dry Time:

Very slow solvent, slower than n-butyl acetate.

Clean-up Solvent:

NA

Reducer:

NA

Retarder:

NA

Pot Life:

NA

Surface Preparation:

NA.

Application:

Use in well-ventilated area.

Ambient Conditions:

NA.

Storage:

Store indoors at room temperature, away from heat, ignition sources, open flames and direct sunlight.

Warning:

Avoid sparking, use non-sparking tools.

Avoid open flames, turn off all pilot lights, ensure that work area is properly ventilated.

Soiled rags and waste products may contain combustible liquids or vapours, dispose in accordance with local regulations.

Refer to MSDS for information on safe use of this product.

Material Safety and Technical Data Sheets for download.

Please click the appropriate link below.

Technical Data Sheets (TDS)

TDS-4T175 - Retarder Concentrate (pdf)

Material Safety Data Sheets (MSDS)

MSDS-4T175 - Retarder Concentrate (pdf)