Product Code:

38C2

Product Description and Uses:

Schwartz Rez-N-Glue Ex 144 HB is a heavy-bodied adhesive, formulated with resins and active solvents, primarily being used to bond Acrylonitrile-Butadiene-Styrene (ABS) plastic together.

It welds surfaces together and fills minute gaps to ensure an excellent bond.

Product Advantages:

1. Provides high bond strength.
2. Fuses/welds ABS surfaces on contact.
3. Fills minute gaps between surfaces.

Physical:

Environmental Information:

VOC: 556 g/L

Suggested Uses:	For welding ABS plastics together.
Dry Time:	For maximum strength, do not disturb bond for 24 hours to allow complete cure. CAUTION - cold temperature, high humidity, or lack of airflow will prolong dry times.
Pot Life:	NA
Reducer:	NA
Retarder:	NA
Clean-up Solvent:	4T003

Surface Preparation:

Surface to be bonded must be clean, dry and contaminant-free.

Ambient Conditions:

Use only when ambient conditions are 18°C to 30°C and RH = 40 - 60%.

Application:

Apply adhesive generously on both surfaces to be bonded using brush or tongue depressor-type applicator.

Surfaces must be slightly softened before bonding.

Bond while in wet condition.

Allow to dry undisturbed for 30 minutes.

Be careful when handling bonded materials that have not been dried for 24 hours.

Allow to completely cure for 24 hours to achieve maximum strength.

Storage:

Store indoors at room temperature, away from heat, ignition sources, open flames and direct sunlight.

Warning:

Use in a well-ventilated area.

AVOID sparking, use non-sparking tools.

Avoid open flames, turn off all pilot lights, ensure that work area is properly ventilated.

Soiled rags and waste products may contain combustible liquids or vapours, dispose in accordance with local regulations.

Refer to MSDS for information on safe use of this product.