Product Code:

4T223

Product Description and Uses:

Schwartz Special Thinner is a high quality solvent blend used as reducer/retarder for lacquer finishes based on nitrocellulose and acrylic where a medium-evaporating retarder is required.

4T223 evaporation rate is between 4T175 and 4T100.

Product Advantages:

1. High quality.
2. Excellent clarity.
3. Reduces and retards lacquer finishes for excellent sprayability.
4. Aids to achieve smooth, defect-free finish by extending flow out time.
5. Helps reduce dry spray

Physical Properties:

Environmental Information:

VOC: 875 g/L

Suggested Uses:	Used for reducing and thinning lacquer finishes based on nitrocellulose and acrylic. Can be used to clean spray tools.
Mixing Ratio:	NA
Dry Time:	Slower than 4T100 Lacquer Thinner.
Clean-up Solvent:	NA
Reducer:	NA
Retarder:	NA
Pot Life:	NA

Surface Preparation:

NA.

Application:

Use in well-ventilated area.

Ambient Conditions:

NA.

Storage:

Store indoors at room temperature, away from heat, ignition sources, open flames and direct sunlight.

Warning:

Avoid sparking, use non-sparking tools.

Avoid open flames, turn off all pilot lights, ensure that work area is properly ventilated.

Soiled rags and waste products may contain combustible liquids or vapours, dispose in accordance with local regulations.

Refer to MSDS for information on safe use of this product.